

2026-07-07
Will high temperature welding damage 3D welding fixture platforms surface?
High-temperature welding may cause different degrees of damage to the surface of 3D welding fixture platforms,and the severity of damage mainly depends on the table material,surface anti-wear treatment process,welding ope...
more

2026-07-07
Difference between 28-hole and 16-hole 3D welding fixture platform
The 16-hole (D16) and 28-hole (D28) are two mainstream standard modular grid systems for industrial 3D flexible welding fixture platforms. They differ greatly in structural parameters, positioning accuracy, load capacity,...
more

2026-07-07
How many types of clamps for 3D welding fixture platform?
1.Basic Definition A 3D welding fixture platform,also named 3D flexible welding table,is a modular universal clamping system specially designed for metal welding and assembly fabrication.It adopts high-rigidity HT250/HT30...
more

2026-07-07
How to do wear-resistant surface treatment on 3D welding platform?
The wear-resistant surface treatment of 3D flexible welding platforms aims to improve anti-scratch,anti-spatter and anti-abrasion performance while maintaining benchmark flatness and positioning hole precision.Four mainst...
more

2026-07-07
Will 3D welding table rust or deform after long use?
Whether a 3D flexible welding table rusts or deforms in long-term service depends on its raw material,heat treatment process and surface anti-corrosion treatment.Qualified cast iron welding platforms can resist rust and d...
more

2026-07-07
What heat treatment process for 3D flexible welding table?
The mainstream raw material of 3D flexible welding tables is HT250/HT300 grey cast iron.Three standard heat treatment procedures are adopted to eliminate internal stress,maintain flatness precision and resist welding ther...
more

2026-03-24
How to Choose Support Legs for 3D Welding Table
Support legs are critical components of a 3D welding table, as they directly affect stability, load capacity, working height and operational comfort. When selecting support legs, you should focus on load-bearing requireme...
more

2026-03-24
What Is the Hole Diameter of a 3D Welding Table?
Difference Between D28 and D16 The standard hole diameters for 3D flexible welding tables are mainly 16mm and 28mm,usually referred to as D16 system and D28 system.These two systems differ in hole spacing,load capacity,ri...
more
