

2026-11-22
Lathe Bed Casting: The Foundation of Turning Accuracy
How a lathe bed casting is designed and made: material grades, rib structure, stress relief, guideway machining and inspection for stable turning accuracy....
more

2026-11-19
T-Slot Cast Iron Platform: Design, Accuracy Grades and Fixture Setup
A practical guide to T-slot cast iron platforms: material and aging, accuracy grades, slot design, load capacity, setup and care for inspection and fixture positioning....
more

2026-11-06
Machining Cast Iron Parts: Tooling and Parameters That Actually Work
Practical guidance for machining cast iron parts, covering tool geometry, speeds and feeds, chip control and how a manufacturer sets parameters for clean results....
more

2026-11-06
Resin Sand vs Green Sand Casting: Choosing the Right Mold
A shop-floor comparison of green sand and resin bonded sand molding for cast iron, looking at surface finish, cost, lead time and when a foundry picks each....
more

2026-11-05
Foundry Pattern Making: Wood, Metal and 3D Printed Patterns
How patterns for cast iron parts are made from wood, metal or printed polymer, and how the choice affects cost, lead time and repeatability....
more

2026-11-05
Gray Iron Grade Selection: HT200, HT250 and HT300 for Machine Tool Castings
How to pick the right gray iron grade for machine tool castings, comparing HT200, HT250 and HT300 on strength, machining and damping for real workshop use...
more

2026-11-05
Cast Iron Repair Welding and Reclamation: When a Casting Is Not Scrap
When and how cast iron castings can be repaired by welding, the risks of cracking, and how a manufacturer approaches reclamation safely....
more

2026-11-05
Cast Iron Machine Guideways: Hardening, Scraping and Protection
How cast iron guideways and bedways are hardened, scraped and protected, and why the casting supplier's early input shapes the final accuracy....
more
